Consider in detail what may be the interior of the bath
Finishing the inside of the sauna is no less important. How to kick out the frame.
Yes, and the cost will probably exceed. But in order to bring to mind your structure, you need to choose the right material and then correctly assemble.
Recently, a large number of materials have appeared on the sales market and sometimes it can be difficult to figure out what exactly to do to finish, so as not to spoil everything. This topic will be devoted to our article.
The content of the article
Flooring
The floor for the bath must be done thoroughly, because it is here that the bulk of the water accumulates, so it must be done thoroughly and efficiently. And a person walks on the floor, so hygiene issues should also be on top.
Let's look at the choice of material for this part of the structure:
- You can immediately think about the tile. It seems to be suitable in all respects.
And from the point of view of hygiene, it will suit, but simply this material has a significant drawback, when it hits the surface of the water it is very slippery.
And therefore it becomes not safe. Nowadays, there is a tile coating that does not slip, only the price of the material is quite high and not everyone can afford it.
The bathhouse itself is a place for rest and relaxation, therefore it is difficult to be completely relaxed when in danger. And such a floor from the point of view of thermal insulation is not very suitable, the cost of heating increases significantly; - Some will think about the device of the floor, for example, marble chips. This coating is not so slippery.
Durable enough and the price is not high. But this floor will also be cold. To grind the surface will require special equipment, and thermal insulation is low.
It is difficult to do such a job with your own hands, but you will have to hire people from outside and the work will fly into a considerable amount. Therefore, this would also not be an ideal option; - All requirements are met by wood. It is environmentally friendly material and affordable.
It does not slip and from the point of view of thermal insulation it is difficult to find a more acceptable option;
Attention: Do not just use edged boards for flooring, use tongue and groove. Its thickness should be at least 30 mm.
Just keep in mind that all the rooms of the bath are quite different in use and this should be taken into account. It will correctly apply various types of wood.
Choosing wood for the floor
Let's go through the types of wood and determine which and where is better suited:
- There is a dressing room in any building (seeHow is the dressing room finished), to which conifers are perfect. This material is pleasant to the touch and has a good texture.
The humidity in this room is not so high and therefore the boards should be placed in the joint and quite tightly. And the temperature here is not so high, close to a normal room.
For coating, you can apply both paint and varnish; - For the steam room, hardwood can be considered the best option. Masters advise in this room to make the floor double.
The base is a sand cushion, through which water flows perfectly. After it, the flooring is made of wood, which should be placed on the logs, which in turn are stacked on columns of brick, which should be made in size of one and a half bricks.
There is not a large gap between the stacked board through which the liquid comes off. Use the board at the time of installation with a moisture content of not more than 12 percent.
Attention: Before starting work, the whole tree must be treated with antiseptics that are available on the market. It is best to use deep penetration liquid and treatment twice.
Before starting installation work, the material must completely dry. This will significantly extend the life of the material and prevent the formation of fungus and rot.
For the floor, draining water is also important, which will drain excess fluid. You can see the diagram itself in the photo.
This is the classic execution of this job.
To facilitate the work, you can apply a simpler and not expensive option:
- To begin with, we concreted the lower level and at the same time it is necessary to make a bias towards the drain, which, as a rule, is done in any of the corners;
- We make a lattice of wood and stack it;
- Boards with the necessary gap are stuffed on top.
In this option, you can simply remove the grate at any time and take it out onto the street for further drying. But such a design is used in small rooms and which are used personally for their own purposes.
We choose the material for wall decoration in the sauna
Manufacturers advertise their material, but most of them will not be suitable for a sauna. We have increased humidity in the room and therefore not everyone will be happy.
Moreover, it is necessary to make the room airtight and not allow heat to escape. Therefore, if we consider the tile, then it becomes clear that it does not fully comply with the finishing parameters.
Plastic is also not recommended for use in the room at elevated temperatures and its use is not advisable. Therefore, again, wood will help us out.
Lining from this material is completely satisfied and meets all the requirements. Sauna decoration from the inside this material is completely satisfied.
It’s better to apply euro lining, of course, and here’s why:
- This product is better in manufacturing. Only good material is applied;
- You can completely do the installation yourself and without resorting to outside help. This is a big plus and you will save significant money;
- The connecting groove in the elements is deeper, which makes the connection more rigid and will not allow heat to leave the room;
- Fully compliant with ventilation cover. Here special grooves are made that promote air circulation;
- The quality of workmanship allows you to avoid unnecessary adjustment, which complicates the work.
Attention: When choosing material for work, pay attention to the type of wood. Preferences are described above.
You should pay attention to the moisture content of the wood and the presence of knots, as well as resin pockets. Defects in the structure of wood quite significantly reduce the thermal insulation of the coating.
And the lower the humidity, the higher the lining life.
Methods for fixing the lining
Instructions for almost any material and its installation are on the pages of our site. You can watch a video on this topic.
There is a lot written about that material, but you have to decide on the system of its fastening and do it right. This is a fairly significant area of the room.
And the work should be done most qualitatively.
There are three types of mounting parts:
- Pre-drilling fixture. In this embodiment, a hole is made for installing a self-tapping screw, which is made in the spike of the element.
After twisting, the hole should be closed with a dowel and polished surface; - Make fastening parts and a construction stapler. This option can be used when mounting the lining from top to bottom.
When holding the brackets, be sure to heat. That would not interfere with the normal entry of the spike of the subsequent board; - Mounting the lining on the Kleimer, which are mounted on the rear groove of the element. They are attached to the frame using self-tapping screws or ordinary nails.
This option is most often used. It is not complicated and reliable.
The rigidity of the structure will be on top.And at the same time it is not so difficult to remove the element if necessary; - This option is used when installing the facing elements from the bottom up. In this case, the lower board after installation in the lower part is attached using a self-tapping screw.
Then it should be dumbed. After this, the fastening is carried out in the upper part and also with the help of a self-tapping screw in the spike of the plate.
It should be said that the hat should not be higher than the plane of the wood. The next plate is put on the spike and after that the second side is fixed with a self-tapping screw.
The last element is attached similarly to the first.
Attention: For our premises, the craftsmen are advised to lay the lining in an upright position. This installation option allows you to freely drain water and not linger.
Do not forget that the lining should never dock with the surface of the floor or wall with its end. When heated and high humidity, it will simply turn out if you do not follow this recommendation.
Do the decoration of the ceiling
This plane for the bath is most important if you look at the issue in terms of heat. It is through the ceiling that the greatest quantity can leave it.
Therefore, the correct finish plays a rather large role in the issue of heat transfer.
For this work, it is worth applying also wood. On the lining fastening mentioned above.
The following should be said. The heat rises and therefore there will be the highest temperature.
Therefore, pay special attention to the material, which should have a minimum amount of resins. When heated, it begins to melt to appear on the surface of the board, resulting in burns.
Attention: It is better to apply a lining for facing, which has undergone additional processing. The price of the material is slightly higher, but you will save yourself from trouble.
Waterproofing
This work is most relevant in decoration at all stages of construction. A bathhouse without waterproofing, and performed qualitatively, will not perform all its functions and should be carried out correctly.
Let's see what is worth applying in this work:
- If you are advised to use bitumen or roofing material, do not do this. Nowadays, there are foil materials on the sales market that are perfect for this job.
This product will perfectly provide vapor and waterproofing. The foil does not take up much space and it can be perfectly fixed by yourself. This is not hard work.
Attention: You should know that such a material has a different structure of the structure and therefore different applications. The steam room has a rather high humidity, so give preference to the material in which kraft paper is used.
For other rooms of the building, cheaper materials can also be used, for example, isocom, isolon or penofol. They are also made on the basis of foil.
Bath decoration from the inside out, this is a pretty serious matter that should not be neglected. Take this seriously.
On our site you can find many articles on this topic, get the right recommendations on the materials. Which are used in decoration.
