How to glue non-woven wallpaper on the ceiling: preparation, stages, results

Gusevsky Andrey Anatolyevich

A small instruction for wallpapering.

When doing repair work with their own hands, the ceiling is often finished in several ways, but the most popular and most profitable according to many criteria is gluing the surface with non-woven wallpaper. This method of decoration is advantageous in that it does not require special skills and remarkably hides defects on the surface. On this occasion, the following question arises - how to glue non-woven wallpaper on the ceiling?

The advantages of non-woven wallpaper

Since the material itself is not quite ordinary in composition, the conditions for working with it are qualitatively different:

• There are so many ways. ceiling finishes.
• Each of them has its own advantages and disadvantages, but still the most popular are wallpapers.

What kind of robot is suitable for this type can be seen in the following table:

In addition to wallpaper, other finishing methods can be used:

• Painting.
• False ceiling.
• Stretch ceiling.
• Smooth or textured plaster.

But these materials are used less often, since they require quite large financial costs, as well as special skills. If you perform this procedure according to the standard scheme, then the result can be unpredictable.

Preparatory work

How to stick non-woven wallpaper on the ceiling yourself?

How to paste non-woven wallpaper to the ceiling so that they last long and look aesthetically pleasing? First, it is worth preparing the surface of the ceiling, where wallpaper will be glued. Then make some estimates and try-ons.

A choice of non-woven wallpaper

How to choose wallpaper for the ceiling?

They can be almost transparent, bright and richly colored. If there is a subsequent coloring, then you can choose transparent. In other cases, it is better to choose saturated colors and shades.

Which glue to choose?

It is important to purchase special glue specifically for this type of wallpaper.

Note. This material is burdened by the presence of several layers of material, then the usual wallpaper concentrate will not work.

Choosing Tools

Non-woven wallpaper how to glue on the ceiling: a choice of tools. In the process, you will need special tools with which to finish.

First of all, these are:

• Paper knife.
• Roller.
• Glue brush.

Cooking surface

Mandatory primer.

Tip. In order to avoid the appearance of yellow spots on the surface of the wallpaper, you need to properly prepare the ceiling. It is better if the entire surface is pre-primed.

In general, the non-woven building material partially maskes the bumps that occur on the ceiling. Therefore, do not carefully level the surface, you need to remove dark spots with a primer so that they do not appear through the material.

Several stages of work

Before starting work, the main question arises - how to glue the non-woven wallpaper on the ceiling?

Since this type of finishing material in comparison with paper counterparts has its own characteristics, a completely different approach is required here.

The pasting instruction involves the following steps:

We clear the surface of the old material.

• The entire surface of the ceiling must be cleaned of the remnants of old finishing materials and treated with special tools.

We make the adhesive composition.

• An hour before you start gluing, you need to soak a special glue for non-woven wallpaper. The preparation method and dosage are indicated on the product packaging.

Note. The main thing is to thoroughly stir the contents of the package so that there are no lumps.

According to the standard, gluing is done from the far wall.

• But initially a line is drawn that will determine whether the first strip of the product will be evenly laid. This reference strip should be measured using a plumb line and a ruler.

On the floor, in accordance with the dimensions, a strip of wallpaper is measured.

• After that, it is applied schematically to the ceiling to confirm the correctness of the parameter. If everything is accurate, then the rest are trimmed in sufficient quantity along this strip.

Next, with a brush, already settled glue is applied to the wallpaper strip.

• In order for the wallpaper to be saturated enough, you need 20-30 minutes. Therefore, do not rush to paste.

While the finishing material is impregnated, apply the adhesive to the ceiling.

• The solution does not need to be spared - the residues can be cleaned without problems. And if the glue is not enough, the material may peel off the surface of the ceiling.

Non-woven wallpaper on the ceiling how to glue?

When the preparation is over, then a strip of wallpaper should be applied to the ceiling and pressed with a roller. Excess glue should be removed with an ordinary rag.

Tip. Roll up the surface until the material completely adheres to the ceiling.

Further summary

And now another, no less important question arises - how to care for such a finishing material after installation:

• Non-woven wallpaper dries for a very long time, since for gluing them to the ceiling, an amount of glue is required, more than for ordinary paper.
• In the future, such material can be processed with special chemical solutions.to clean them of dirt and dusty deposits.
• In any case, such complications are worth it, as a result, the ceiling will look very aesthetically pleasing. - all minor defects will be hidden, visually the ceiling will become more textured and attractive.
• In addition, non-woven wallpaper looks very expensive and richly, so they are often preferred overhead and suspended ceilings.

Photo of non-woven wallpaper in the interior:

In the future, it will be possible to save on repairs - change the style of the ceiling design by simply painting the wallpaper with special paint. Such a solution is much more profitable than other finishing works.The video in this article will tell you in more detail about all types of work.