Types and performance of compressors
Hello. Our site is for informational purposes only, therefore we will not name specific brands.
In order to apply a fur coat to the wall surface, there are a large number of compressors. All of them are distinguished by their power and performance.
Types of compressors that are widely used for applying a fur coat
At the moment, the network has one and two stage compressors. Their performance, respectively, varies.
Tip. To choose the right compressor for applying to the surface of a fur coat, it is worth initially determining the consistency of the solution, since the choice of equipment will depend on it.
so:
- Single stage compressors operate on the basis of compressed air. It contributes to the operation of the crankshaft and electric motor. When using a voltage of 220 V, the compressor power of this type is at least 0.3 hp. and reaches 2 hp
- The standard compressor power selection is 1.5 hp. Here the volume of the receiver is 0.35 cubic meters. This type of equipment is considered the most primitive for painting surfaces, but quite often it is used for applying a fur coat to the wall, then the solution should be quite liquid.
Tip. Such a compressor should be used quite carefully, since it does not have an internal cooling system and is able to shut off during overheating.
- Most often, two-stage compressors are used for applying a fur coat, which have great power and performance. Here, the smallest power is 1.5 hp, a voltage of 220 V. is used.
- The most important thing is to choose the right gun for applying a fur coat. It all depends on the needs of the repairman, and what layer he wants to get on the surface
Tip. For applying a fur coat, you can use a power of 1.5-2 hp. with a not too large aperture of the gun, as the solution can fly out in large parts and thereby spoil the exterior finish.
Such compressors are good in that they can be cooled on their own, which means there will be no interruptions in the performance of work.
